Restumping is a term that describes a process where sections of your foundation will be removed, filled with new mortar, and reblocked into place. Reblocking is when the old quarter of footing is replaced with fresh concrete or another type of footing material. These types of restumping & reblocking activities can also involve removing existing outside steps and repairing or replacing walls, grades, and other features inside the home that have deteriorated over time. Here’s the complete step-by-step breakdown of how this process of making the foundation of your home works:
Step 1: Removal of Old Wooden Stumps
The first step, of course, is to remove the old wooden stumps. A home must be “restumped” or “reblocked” because the original woodblocks have been damaged over time from water damage, erosion, termite, and other types of damage. When the woodblocks start to break apart and crack, it allows the soil around them to erode. Over time, this can cause significant problems with your overall foundation; as you are essentially losing support around the perimeter of your house, that’s keeping the level of your wall in place. To meet your requirements for restumping click here and hire the best pair of hands at work.
Step 2: Deep Cleaning of the Soil
To ensure that the new cement additions are appropriately compacted, it’s essential to ensure that the soil below is perfectly clean. Dirt and sand can act as a barrier between the earth and concrete, leading to water pooling or seepage problems. During this process, your construction company will use several methods to ensure that the foundation hole is perfectly clean before restumping & reblocking work begins.
Step 3: Excavation
Excavation is where your actual holes in your yard will be dugout. This is an essential step because it allows us to ensure that the soil at the bottom of your spot is wholly removed. Depending on the materials you have in your yard, these holes can be anywhere from a few feet to 6 or 7 feet deep.
Step 4: Laying Out Your Stacked Blocks
Once holes are dug out for the foundation, the restacking process begins! Every block is treated as one large piece of concrete and involves giving extra care to ensure that all the blocks are laid out perfectly and centred on each other. This is important for aesthetic reasons and to ensure that your blocks are perfectly level and centred on each other.
Step 5: Finalizing The Design
Professional contractors will then work together to make sure that the design for your foundation is finalized. During this process, they make any necessary changes to ensure that your property is level and ready for reblocking in the future. However, there is no need to worry as you can hire a team of experts to help throughout the entire process!
This is used to replace old damaged wooden stumps of a house with solid concrete-made blocks. This gives better stability and adds to the life of your home.
